Skip to main content

UNDER CONSTRUCTION

Remapper

Cross Cut and RCFW has a web-based remapper tool which can be accessed by going to https://www.remap.box/. Then hold start while plugging your controller into a PC to connect to the remapper.

anatomoy of the remapper​

anatomy of the remapper

left bar is layouts

right bar is default layout for each mode

button holds​

config/remapper​

enter image description here

button hold to enter config mode for the remapper

BOOTSEL​

To flash new/other firmware onto your controller you must activate bootsel by holding all the C stick buttons while plugging into PC.

enter image description here

button hold for bootsel